Flange Washers

View Products

American Belleville’s Flange Washer line adds deflection to bolted joints, in order to dramatically reduce the effects of large fluctuations in temperature within the application, vibration, bolt creep (stretch), gasket creep, or relaxation, and other elastic interactions within the joint. They may be flattened, without losing operating preload, except in cases where dynamic cycling occurs. Typically, at least two American Belleville Flange Washers will be used in a single bolted assembly, with one on either end of the bolt. The ID, on the convex side of the washer should contact the underside of the bolt head and the nut. The OD edge on the concave side of the washer should always contact the flange surface.

American Belleville Flange Washers can be specified by identifying a few characteristics of the application, starting with bolt diameter and bolt stress; the latter calling out either 30,000 psi, 45,000 psi or 60,000 psi. They can be utilized in either inch or metric applications, and are typically made using three different raw material options:

  • H13 Tool Steel (ASTM A681) for refining and chemical flange bolting applications with temperatures reaching over 1000 deg. F, where corrosion resistance is not crucial, but high strength is. This material is fully magnetic.
  • 17/7PH Stainless Steel (ASTM A693) for refining and chemical flange bolting applications reaching 500 deg. F, and where high strength and corrosion resistance is needed. This material is highly magnetic.
  • Inconel 718 (ASTM B670 / AMS 5596) for flange bolting applications reaching over 1000 deg. F. This material is highly corrosion resistant, offers good strength properties and is non-magnetic.

Traditional applications for American Belleville Flange Washers include:

  • Pipe Flanges
  • Heat Exchangers
  • Valves

Low temperature applications (Cryogenic) can also utilize American Belleville Flange Washers

We will work closely with you to specify or design, and then manufacture the proper part for your application. Contact us online or call 440-721-8350.

Flange Washers - Search
Item ID Bolt Dia ID (min) OD (max) THK (Nom) OH (Ref) Deflection (Nom) LBS F 100% Torque (Lubricated) Torque (Dry) Bolt Stress (KSI)
AFM10-30-H13 10mm 0.410 0.718 0.085 0.094 0.009 2,350 12 15 30
AFM10-45-H13 10mm 0.410 0.718 0.104 0.111 0.007 3,340 16 22 45
AFM10-60-H13 10mm 0.410 0.718 0.119 0.126 0.007 4,760 23 31 60
AFM12-30-H13 12mm 0.488 0.854 0.103 0.114 0.011 3,490 21 27 30
AFM12-45-H13 12mm 0.488 0.854 0.125 0.134 0.009 5,220 31 41 45
AFM12-60-H13 12mm 0.488 0.854 0.144 0.152 0.008 6,980 41 55 60
AFM14-30-H13 14mm 0.567 0.995 0.120 0.132 0.012 4,570 31 42 30
AFM14-45-H13 14mm 0.567 0.995 0.146 0.156 0.010 6,860 47 63 45
AFM14-60-H13 14mm 0.567 0.995 0.168 0.177 0.009 9,440 65 87 60
AFM16-30-H13 16mm 0.644 1.148 0.142 0.157 0.015 6,690 53 70 30
AFM16-45-H13 16mm 0.644 1.148 0.173 0.185 0.012 10,080 79 106 45
AFM16-60-H13 16mm 0.644 1.148 0.200 0.211 0.011 13,710 108 144 60
AFM18-30-H13 18mm 0.724 1.285 0.165 0.180 0.015 8,820 78 104 30
AFM18-45-H13 18mm 0.724 1.285 0.199 0.212 0.013 13,340 118 158 45
AFM18-60-H13 18mm 0.724 1.285 0.232 0.243 0.011 17,980 159 212 60
AFM20-30-H13 20mm 0.811 1.455 0.176 0.192 0.016 8,770 86 115 30
AFM20-45-H13 20mm 0.811 1.455 0.214 0.228 0.014 13,860 136 182 45
AFM20-60-H13 20mm 0.811 1.455 0.242 0.254 0.012 17,160 169 225 60
AFM22-30-H13 22mm 0.901 1.590 0.204 0.224 0.020 14,520 157 210 30
AFM22-45-H13 22mm 0.901 1.590 0.248 0.265 0.017 21,720 235 314 45
Item ID Bolt Dia ID (min) OD (max) THK (Nom) OH (Ref) Deflection (Nom) LBS F 100% Torque (Lubricated) Torque (Dry) Bolt Stress (KSI)
AF1250-60-H13 1 1/4 1.281 2.310 0.422 0.443 0.021 60,840 951 1,268 60
AF1375-30-H13 1 3/8 1.406 2.470 0.332 0.362 0.030 36,630 630 839 30
AF1375-45-H13 1 3/8 1.406 2.470 0.404 0.429 0.025 54,910 944 1,258 45
AF1375-60-H13 1 3/8 1.406 2.470 0.465 0.487 0.022 73,210 1,258 1,678 60
AF1500-30-H13 1 1/2 1.531 2.680 0.364 0.396 0.032 44,010 825 1,100 30
AF1500-45-H13 1 1/2 1.531 2.680 0.443 0.470 0.027 65,970 1,237 1,649 45
AF1500-60-H13 1 1/2 1.531 2.680 0.510 0.533 0.023 87,990 1,650 2,200 60
AF1625-30-H13 1 5/8 1.649 2.950 0.400 0.435 0.035 53,570 1,088 1,451 30
AF1625-45-H13 1 5/8 1.649 2.950 0.487 0.516 0.029 80,390 1,633 2,177 45
AF1625-60-H13 1 5/8 1.649 2.950 0.560 0.586 0.026 106,970 2,173 2,897 60
AF1750-30-H13 1 3/4 1.774 3.170 0.432 0.470 0.038 62,480 1,367 1,822 30
AF1750-45-H13 1 3/4 1.774 3.170 0.526 0.557 0.031 93,760 2,051 2,735 45
AF1750-60-H13 1 3/4 1.774 3.170 0.605 0.633 0.028 124,820 2,730 3,641 60
AF1875-30-H13 1 7/8 1.899 3.389 0.465 0.505 0.040 72,390 1,697 2,262 30
AF1875-45-H13 1 7/8 1.899 3.389 0.566 0.599 0.033 108,540 2,544 3,392 45
AF1875-60-H13 1 7/8 1.899 3.389 0.581 0.614 0.033 114,520 2,684 3,579 60
AF2000-30-H13 2 2.024 3.600 0.498 0.540 0.042 82,980 2,075 2,766 30
AF2000-45-H13 2 2.024 3.600 0.606 0.641 0.035 124,320 3,108 4,144 45
AF2000-60-H13 2 2.024 3.600 0.622 0.656 0.034 131,140 3,279 4,371 60
AF2250-30-H13 2 1/4 2.281 4.040 0.563 0.610 0.047 105,940 2,980 3,973 30
ABV-Icon-Circle